am having trouble moving from one snapped shot to the next when I have the beam splitter camera active. This only happens when changing from shots stored both on the SAME, 50ft by 50ft SET (Interior). What happens is the camera appears in the right position on the flooplan, but the green camera axes lines and the blue sp line are those from the PREVIOUS camera position. The camera preview window labeled beam splitter also shows the view from the PREVIOUS camera position. (Theres a coupla screenshots here, so you can see what I mean....)
The only workaround I have found is to make plan view active and to delete the bem splitter camera from the set, then to UNDO delete, replacing the camera, which them refreshes the correct view in the camera preview window.
Is may grafic card not good enough?
I am running FF188.8.131.52 (3D) on my iMac 2.4GHz Intel Core 2 Duo, 4GB 800MHz Memory, OS X 10.5.8, ATI Radeon HD 2400.
- Prob with Refresh for Beamsplitter Camera Position
- Bild 16.jpg (52.73 KiB) Viewed 2176 times
- Prob with Refresh for Beamsplitter Camera Position, example 2
- Bild 15.jpg (57.01 KiB) Viewed 2176 times
treehaus stereoscopic services
"If you hear a harmony, sing a melody"
FF(Stereo)V3, Mac OS 10.6.8, iMac 2.4Ghz Intel Core 2 Duo, 4GBSDRAM, ATI Radeon HD 2400 with 128mb vram